• US
  • World market leader
  • Sustainability
  • Solutions
    • Fire protection curtains

      Fire protection curtains

      Fire protection curtains are seal openings in walls and ceilings in case of fire. The constructional set-up (rolling- or folding technology) and the use of different fabrics offer a wide application spectrum as well as different protection targets or classifications and time classes. Casings and side guides of those flexible applicable systems are integrated almost invisibly in the building and provide much scope for design of sophisticated architecture for opened designs.

    • Conveyor system closures

      Conveyor system closures

      Manifold production - and logisitc processes require different construction types of conveying systems. If the haulage drifts are passing through fire-retarding resp. fire-resisting walls or ceilings, the necessary openings must be provided with fire protection closures to avoid the expansion of the fire by conveyor technique or by conveyed material. In case of fire the conveyor system closures have to seal those openings immediately and automatically. Thereby a classified fire resistance as well as the smoothly clearing of the closing area must be respected in case of release.

    • Smoke curtains

      Smoke curtains

      A smoke curtain is part of unit keeping areas free from smoke and may include building parts like natural smoke and heat venting systems and automatic smoke and heat venting systems. Smoke curtains restrict the movement of fire gases inside a building in case of fire.

    • Smoke protection closures

      Smoke protection closures

      In closed condition smoke protection closures restrict the passage of smoke in the phase of fire formation so as to enable the rescue of people, animals or materials assets in case of a fire in the room positioned behind it without the need of breathing protection.

    • Tube sealings

      Tube sealings

      The solution to problems with fire protection dampers for ventilation and air conditioning systems in conveying processes. Stöbich offers fire protection for pneumatic conveying lines where the closing elements are not exposed to the flow. Thus, damage or contamination of the closure element is avoided by abrasive conveyed goods.

    • Controls

      Controls

      Control systems are necessary for all automatic fire protection systems! They are safety-relevant, because without their function or in the event of a malfunction, the entire investment of a fire protection partition would be useless. Controllers coordinate both fire detection and the interaction with other controls, like superordinate building control or the retraction of the closing area at conveyor closing area.

    • Médiathèque Charles Nègre | Grasse, France

      Médiathèque Charles Nègre | Grasse, France

      The Médiathèque Charles Nègre in Grasse, France, is an impressive example of contemporary architecture that reflects the cultural and historical importance of the region. The information center with space for education, culture and encounters was opened in 2011 and designed by the renowned French architecture firm Marc Barani. The building combines modern aesthetics with the traditional architecture of Provence, creating a harmonious link between old and new, for example by combining modern materials such as glass and steel with local natural stone. The generous window fronts create an atmosphere flooded with light. Ecological sustainability is achieved through natural ventilation and the resulting reduction in energy consumption; green spaces are also integrated on various levels. Our <a href="/us/solutions/fire-protection-curtains/stoebich-fire-smoke-curtain-hc"><b>➥ horizontal Fire and smoke curtain hc</b></a> fire protection curtains fit perfectly into this marvel of contemporary architecture. They securely close the ceiling openings in the event of a fire, but otherwise remain invisible and let in plenty of light and air. Copyright attribution: © Ivry Serres

  • References
  • Theme worlds
  • News
  • Contact

SYSTEM: FIBERSHIELD® | MODEL: FIBERSHIELD®-I

(Kopie 1)

  • Fibershield-I

Product description

Heat-insulating fire protection closure with a textile design that closes automatically in the event of an alarm, vertical installation position and closing direction.

TypeHeat-insulating fire protection closure with textile design
VerificationCE marking according to EN 16034:2014 in conjunction with EN 13241:2003+A2:2016
Closing directionFrom top to bottom
Fire resistanceEI1 30 – EI2 120 | Tested according to EN 1634-1:2014-03 | Classified according to EN 13501-2:2016
Smoke protectionSa: for joint length 14.5 m for EI1 30 – EI2 120 | Tested according to EN 1634-3:2005-01 in connection with EN 1363-1:2012-10 | Classified according to EN 13501-2:2016
Closing cyclesC0, C1, C2 | Tested according to EN 12605:2000-08 | Classified according to EN 13501-2:2016
Fire behaviour of textileB-s1, d0; E-d2 | Tested according to ISO 11925-2 and EN 13823 | Classified according to EN 13501-1:2018
Environmental conditionsSpecial environmental conditions are not taken into account (e.g. humidity > 80 %, ambient temperature < 5 °C and > 45 °C, wind loads etc.).
Visible surfacesgalvanized | RAL, smooth, silk gloss, standard coour shade | Stainless steel type I V2A material A-1.4301 (bright) | Stainless steel type I V2A material A-1.4301, K240 (ground) | in each case for the visible surfaces of the housing and the guide rails

Downloads

FiberShield-I Stöbich

Key: System components:
1 = Smoke detector
2 = Housing
3 = Guide rail
4 = Control module
5 = Release device (see the valid general type approval of the brake system for design details of the electrical components.)

Key: Dimensions
Structure
B = Clear shell construction height
A = Clear shell construction width
System
AY = System height
LH = Clear system height
LB = Clear system width
BJ = System width
Housing
BX = Depth
BW = Height
v = Offset between housing and guide rail
Guide rail
CD = Width
CE = Depth
BD = Offset left
BE = Offset right

Size dimensions and system structure

The combination of classifications or the ratio of clear system width to clear system height may reduce the stated maximum dimensions and the dimensions of the housing and guide rails may vary. The specifications on the quotation apply.

Fire resistance/classificationsSize max.* [y x r] in mmFabricWall thickness* in mmHousingGuide rails
EI1 30/EI2 307315 x 3800Stratex 3150Type AType 1 oder Type 3***
EI1 30/EI2 307315 x 4950Stratex 3150Type BType 1 oder Type 3***
EI1 606600 x 4840Stratex 12150Type BType 2
EI2 604400 x 3400Stratex 6150Type AType 1 oder Type 3***
EI2 604400 x 4400Stratex 6150Type BType 1 oder Type 3***
EI2 606000 x 4840Stratex 9150Type BType 1
EI1 906000 x 4400Stratex 12150Type BType 2
EI2 906000 x 4400Stratex 9150Type BType 1
EI2 1206000 x 4840Stratex 12175Type BType 2
SaSa = joint length must not exceed 14.5 m (normative: 3-sided without end strip)
C7315 x 4950Stratex 3, EI1 30/EI2 30
C14400 x 4400Stratex 6, EI1 60
6000 x 4400Stratex 9, EI2 60
6000 x 4400Stratex 9, EI2 90
C26600 x 4840Stratex 3, EI1 30/EI230
6600 x 4400Stratex 12, EI1 60/EI260
6600 x 4400Stratex 12, EI1 90

The installation situation must comply with the building code requirements of the country of installation. The fire resistance of a ceiling or wall support structure and the adjacent components must at least correspond to that of the fire and/or smoke protection closure/fire and/or smoke protection curtain. Proof of the stability and serviceability of the adjacent walls and components must be provided under general ambient conditions and in the event of fire. See also notes on the standard supporting structure in EN1366-7:2004 or EN1363-1:2020. The fire protection system must not be subjected to any additional loads other than its own weight, even in the event of fire.
* Deviations from size dimensions on request
** tested wall types according to the installation instructions
*** Guide rails type 3 maximum size 3000 x 2870 mm and no continuous functions C1 & C2

Housing


Wall with housing cover
Wall with housing cover
Type A: BX = 380 mm, BW = 350 mm
Type B: BX = 460 mm, BW = 430 mm
Wall without housing cover
Wall without housing cover
Type A: BX = 380 mm, BW = 350 mm
Type B: BX = 460 mm, BW = 430 mm
Wall without housing cover, with false ceiling
Wall without housing cover, with false ceiling
Type A: BX = 380 mm, BW = 350 mm
Type B: BX = 460 mm, BW = 430 mm

Guide rails


Type 1
Type 1
CD = 200 mm
CE = 82 mm
v = 47 mm
Type 2
Type 2
CD = 230 mm
CE = 110 mm
v = 42 mm
Type 3
Type 3
CD = 90 mm
CE = 120 mm
v = 77 mm

BD & BE = 0 mm für EI1 30, EI2 30
BD & BE = 60 mm für EI2 60