• EN
  • World market leader
  • Sustainability
  • Solutions
    • Fire protection curtains

      Fire protection curtains

      In case of fire, fire protection curtains close wall and ceiling openings. Their construction (roll-down or folding technique) and the use of different fabrics provide for a wide range of applications as well as different protection goals, classifications and time classes. The casing and guide rails of the highly flexible systems blend almost invisibly into the building and allow plenty of scope for sophisticated architecture and open room concepts.

    • Conveyor system closures

      Conveyor system closures

      Various production and logistics processes call for the most diverse types of conveyor systems. If these conveyor lines pass through fire-retardant or fire-resistant walls or ceilings, the openings required for this purpose must be provided with fire protection closures to prevent the spread of fire through the conveyor system or the goods conveyed. In the event of fire, conveyor system closures (CSC for short) must close these openings immediately and automatically. Fire resistance classified according to DIN EN 13501-2 is just as important as the smooth clearance of the closing areas in the event of a fire.

    • Smoke curtains

      Smoke curtains

      A smoke apron is a part of a smoke control system which also includes other components such as natural smoke and heat exhaust ventilators (EN 12101-2) and mechanical smoke and heat exhaust ventilators (EN 12101-3). Smoke aprons restrict the movement of combustion gases within a building in case of fire.

    • Smoke protection curtains

      Smoke protection curtains

      Once closed, smoke protection curtains (SPC) restrict the passage of smoke during the phase of fire formation, so that in the event of a fire, there is enough time to rescue people and animals from the room behind the curtain and to recover material assets without the need for respiratory equipment.

    • Tube sealings

      Tube sealings

      The solution for issues with fire protection dampers in ventilation and air conditioning systems in conveyor processes. Stöbich offers fire protection for pneumatic conveyor lines the closing elements of which are not exposed to the flow of conveyed material. This way, the closing element cannot be damaged or contaminated by abrasive conveyed goods.

    • Control units

      Control units

      Each automatic fire protection system needs a control unit. They are critical to safety, because a failure of this function means that the entire investment into a fire protection sealing has been in vain. Control units coordinate both fire detection and interaction with other control units, such as higher-level building control systems or clearing of the closing area of conveyor system closures.

  • References
  • Theme worlds
  • News
  • Contact
Product - Omnicompact

Omnicompact

Conveyor system closure designed as a space-saving, vertical fire protection stacking door

Product description

Space-saving and extra sturdy sheet metal closure for discontinuous and separate conveyor systems: Omnicompact features a segmented damper blade. This stacks up into the lintel area during closing. The system is suitable for very large openings, but is also available as a low-camber version that just requires a height of 560 mm. Omnicompact complies with the requirements of fire resistance classes EI 30 to EI 120 (tested according to DIN EN 1634-1) and is approved as a T30 and T90-gate.

Omnicompact

Type

Vertical fire protection stacking door

Closing direction

From top to bottom

Fire resistance

T 90 • EI1 120 • tested according to DIN EN 1634-1

Re-opening

electromotive (standard)

Conveyor system

Interrupted conveyor system • Continuous conveyor system • Continuous roller conveyor system • Continuous suspension chain conveyor • Continuous travelling carriages

Downloads

System drawing Omnicompact
Constructive system design - System drawing Omnicompact

a 230–295 b 298–352 c 500-690 d 872-1672 s 120


a 230–295 b 298–352 c 500-690 d 872-1672 s 120

Required wall quality

masonry

d ≥ 240 mm

concrete

d ≥ 140 mm

aerated concrete

d ≥ 200 mm

reinforced aerated concrete

d ≥ 200 mm

Technical feasibility

LH

(T30) 2000 mm - 6000 mm

 

(T90) 2000 mm - 4500 mm

 

(EI90) 2000 mm - 6400 mm

 

(EI120) 2000 mm - 4300 mm

LW

(T30) 1000 mm - 9000 mm

 

(T90) 1000 mm - 4500 mm

 

(EI90) 1000 mm - 6700 mm

 

(EI120) 1000 mm - 4500 mm